Helpful Hints on
Using a Point and Shoot Camera
1.
Make
sure your batteries are fresh and your sd card/ flash card has enough room for
content. To clear your card, you will want to format it. It’s in most menus if
you scroll down.
2.
Know
your camera settings (look at the manual or have someone show you). There’s
nothing like going on assignment and not being able to operate the camera.
Would suggest using A for automatic most of the time.
3.
Most
digital cameras have selections for fine, normal and basic. For the best
quality, use the fine setting. This also uses the most amount of space on your media card. If you are
hurting for space, go to normal. Would not recommend basic unless desperate.
4.
Delay
time: As digital point and shoots advance, the delay time is getting better so
if your camera does have a delay when you push the shutter, it can help if you
hold the shutter ½ way down before you shoot. You will be limited on action and
spontaneous moments so just be aware of this. Sometimes, a portrait will just
have to do. Communicate with your subject and have them be ready for the shot.
5.
Shoot
more than just one or two images. If you are shooting digital, you are not
wasting film or money so go for it and have something to choose from. The more
you shoot, the better you will get.
6.
Get
close to your subject. When you move closer to the subject matter, the focus
becomes clearer and less distracting. Keep in mind what the point of your shot
is…is it the desk and clutter or the person?
7.
Don’t
be afraid to experiment. Example: computer shot with Scott. Different focal
lengths. Get in tight using the light from the screen to illuminate the face
instead of flash. If every photo is shot the same way, it looks boring after
awhile.
8.
Communicate
with the subject. Try to get the subject to relax. Tell him a joke or talk to
him while you are shooting. Many people panic when they are going to have their
photo taken. Reassure them it won’t be painful. Sometimes I have them take a
breath and let it out.
9.
You
take control. Act like you know what you are doing, even if you don’t feel that
confident. It is best when the subject trusts you so just try to direct him.
Use the same pose that works for you first or the same line until you dare to
try something else.
10.
Grip
and grins. We try to avoid these but if you can’t, they don’t have to be
boring. Get in closer, try a different angle like standing on a desk or laying
on the ground.
11.
Show
emotion. A photograph that captures emotion is the greatest! People are drawn
to look at it. Notice Scott and Don in the check passing. It starts out slow
than when it ends in the reaction with the fresh angle-yipppeee!
12.
Try
to stay away from backlight. An example is when you pose someone in front of a
window. Don’t do it! The camera will silhouette the subject because it thinks
it has plenty of light, but in reality, you don’t. Use the window light though
and reposition your subject to the side so the light can hit their face. It is
very flattering and you won’t need a flash.
13.
Try
to be aware of the background. If the background is clutter, it will be
distracting and your subject will not be the point of the image. Either come in
tighter or move the subject to a different location. A “clean” background like
a bush or brick wall, etc. will be better. Try to use the environment to your
advantage.
14.
Shooting
a portrait. You know those shots- a photo is needed of someone in the community
and after you interview the guy, take a picture. Don’t let the guy just stand
there. Take control and pose him. Look around and shoot outside if you can-
that’s usually the best light unless there are great windows where you are. Maybe
you can have him lay in the grass or pose on a stone wall looking relaxed. It
might be better to photograph him after the interview because it might give him
a chance to loosen up a bit. If you need to tie the subject in with work, like
a business shoot, be as creative as possible. Follow the rules above but work
with what he’s got in his office or workplace.
15.
Using
flash. The world of flash is confusing and really in depth. Point and shoots
will often have red eye reduction/ no flash/ bright and sunny day flash
options. Red eye reduction will help you if you are in a dark place where there
isn’t much light available. A person’s retina picks up the light so when the
redye reduction flickers, it helps close it down and eliminates the red eye.
Using no flash is helpful if you want to use another light source such as
window light. It’s very flattering and moody. Using flash on bright sunny days
is called “fill flash.” It will fill in the dark areas, nose, eye sockets, etc.
that the sun creates. High noon is the best time to use it. If you have to
shoot an accident at night or fire, etc. you are very limited with a point and
shoot. Just do the best you can there. Get as close as you can to the subject
matter. The flash can only reach so far and make sure you let the battery
recycle before shooting again because you won’t get a full burst.
16.
Lastly,
keep shooting….the more you do it, the better you get. Look at other people’s
work whenever possible and it can give you ideas and get you inspired.